Выбор страницы

Поставщик ZS сделано в Китае - запасные части - в Энугу, Нигерия, заводская цена, высокоточная муфта кулачкового вала для машин автоматизации с высоким качеством

Zs Supplier Made in China – Replacement Parts in Enugu Nigeria – High Precision Jaw Shaft Coupling for Automation Machinery

Введение

The high precision jaw shaft is a three-piece design consisting of two aluminum hubs press fit onto a center disk. Torque transmission is achieved by mating the slots on the center disk to the drive tenons on the hubs. During operation, the center disk slides on the tenons of each hub (which are orientated ninety degrees apart) to transmit torque.

Although the couplings accommodate a small amount of angular and axial misalignment, they are particularly useful in applications with parallel misalignment. We offer oldham couplings in set screw or clamp designs with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp type, keyed, or keyless) are interchangeable and can be mixed into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for enhanced lubricity, improved life, and reduced inertia. Hubs are also available in stainless steel upon request for increased corrosion resistance.

Распространенные сценарии использования

  • Light duty industrial and motion control applications
  • Acts as a torque limiter during overload
  • Electrical isolation due to the non-conductive nature of the center disk

Преимущества

  • High absorption capacity of radial misalignment
  • Does not create kinematic errors in transmission
  • Устранение нагрузок на вал
  • Mechanical stability against excessive torque
  • Replaceable disk

Материалы, которые можно использовать с продуктом

The high precision jaw shaft coupling can be used with a variety of materials such as steel, aluminum, and plastic.

Установка, обслуживание и ремонт

Installation: The high precision jaw shaft coupling should be installed by a qualified professional. Proper alignment is necessary for the coupling to function correctly.

Maintenance: Regular inspection and cleaning of the coupling is necessary to ensure proper operation. Lubrication is also recommended.

Repair: If the coupling is damaged, it should be replaced immediately to prevent further damage to machinery.

История и категоризация

The high precision jaw shaft coupling has been used in industrial and motion control applications for many years. It falls under the category of couplings and is a type of oldham coupling.

Продвижение продуктового бизнеса EVER-POWER GROUP

At EVER-POWER GROUP, we are committed to providing quality products, favorable prices, and attentive service to our customers. We welcome you to visit us and customize your orders. Our products are manufactured with precision and rigorously tested to ensure optimal performance. Trust us for all your coupling and необходимо.

FAQ

1. What sizes do the oldham couplings come in?

The oldham couplings come in set screw or clamp designs with bores ranging from 4mm to 35mm.

2. Can the oldham coupling hubs be interchanged?

Yes, inch and metric hubs (set screw, clamp type, keyed, or keyless) are interchangeable and can be mixed into a single coupling as long as they have the same outside diameter.

3. What are the benefits of using the high precision jaw shaft coupling?

The high precision jaw shaft coupling has a high absorption capacity of radial misalignment, does not create kinematic errors in transmission, eliminates loads on the shaft, provides mechanical stability against excessive torque, and has a replaceable disk.

4. What materials can be used with the high precision jaw shaft coupling?

The high precision jaw shaft coupling can be used with a variety of materials such as steel, aluminum, and plastic.

5. How should the high precision jaw shaft coupling be installed?

The high precision jaw shaft coupling should be installed by a qualified professional. Proper alignment is necessary for the coupling to function correctly.

Note: All the content of this page is from the internet and is only for reference when selecting products. We are not the original trademark holder. Our products are only applicable to aftermarket replacement parts rather than original parts. If you need to buy original spare parts, please contact the original factory to buy.

Свяжитесь с нами для получения дополнительной информации → https://www.ever-power.net/contact-us/

Вы всегда можете запросить любую информацию! Пожалуйста, не стесняйтесь обращаться к нам!

МАТЕРИАЛЫ В НАЛИЧИИ

1. Нержавеющая сталь: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Латунь: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200 (CuZn37), C28000 (CuZn40)
4. Бронза: C51000, C52100, C54400 и т. Д.
5. Железо: 1213, 12L14,1215
6. Алюминий: Al6061, Al6063
7. OEM согласно вашему запросу

ОБРАБОТКА ПОВЕРХНОСТИ

Отжиг, естественная канонизация, термообработка, полировка, никелирование, хромирование, цинкование, желтая пассивизация, пассивизация золотом, сатинирование, черная окраска поверхности и т. Д.

СПОСОБ ОБРАБОТКИ

Обработка с ЧПУ, пробивка, токарная обработка, фрезерование, сверление, шлифование, протяжка, сварка и сборка

КК И СЕРТИФИКАТ

Самостоятельная проверка технических специалистов на производстве, окончательная проверка перед упаковкой профессиональным инспектором по качеству

ISO9001: 2008, ISO14001: 2001, ISO / TS 16949: 2009

УПАКОВКА И ВРЕМЯ

Размер: Рисунки

Деревянный ящик / контейнер и поддон или согласно индивидуальным спецификациям.

15-25 дней образцы. 30-45дней официальный заказ